Swamps

An odd place to start, but I really like the way they turn out when they are finished. You will need the following:

• Ready mixed filler putty
• Woodland Scenics static grass (I use dark green)
• Woodland Scenics Water
• Woodland Scenics Scenic Cement (watered down PVA white glue)
• Woodland Scenics tall grass
• Cardboard/wood base
• Sand/talus and small rocks
• White tacky glue
• Earth toned paint
• Green paint
• Paintbrush and palette
• Dixie cup
• Ink wash

Sounds like more than it actually is. This is actually a very simple process; you can make several in an hour or two if you want. I would recommend making a plan where you make 4-6 individual swamps that are shaped in such a way where they can connect an make one big swamp. It really adds more options to your layout to have several sizes.

First things first, you need your base. I use more wood now, but in the past I used cardboard. The kind in particular I used was the kind that was the bottom of a 24 pack of bottled water. Whatever you chose, draw out your design and cut it out in the desired shape.

Next is to put filler putty all around the edges of the base. Make sure that it is high enough to contain the water when you pour it later. Here is an example:

When it is completed you should have something like the image below. In addition to the borders, you can use the putty to make islands in the middle.

Next, when the putty is dry, get some tacky glue and spread it all over the swamp. Then sprinkle sand all over the swamp, as well as a few small rocks in select locations. Wait for it to dry.

Next, get your earth tone paint and paint the entirety of the swamp. You may notice that it is difficult to paint with regular brushstrokes because they will remove the sand. The technique I used, if I remember right, was to load the brush with a lot of the paint and dab the areas. In this way, nothing gets damaged.

After the paint dries, I like to use black ink wash to make the brown blend evenly, as well as to give it a darker, more realistic tone (If you look at the above picture closely, you see small, exposed spots without paint. It is vital to use the ink wash to cover them up). After the ink wash the swamp should look like this:

I forgot to take a picture at the time when it was just ink washed, so this picture shows the results of the ink wash, as well as the static grass. To apply the static grass, let the ink wash dry, then get some watered down PVA white glue and brush it on all of the locations where you want the grass. Try to avoid areas where it will just be submerged anyway, and instead stick to the border and the islands.

You may want some long grass or reeds in your swamp. Woodland Scenics makes tall grass that you can pinch together, cut to size, and glue in place. Glue a couple lumps down with white glue adjacent to the land portions, and now you are ready to add the water.

Woodland Scenics water costs about twenty dollars. I know that sounds expensive, but the swamp water is necessary for the look of the swamp. That, and the water, when hardened, will help to hold down the tall grass clumps at the same time. Get out your Dixie cup and pour in it enough water to fill in the swamp. Add your green paint to the water in the cup and stir it well to mix them. When you are satisfied with the result. pour it into the swamp, letting it settle flat, and remove air bubbles when they appear. For the last time, let it dry.

There you have it: Some swamps to include on your gaming table. The most notable use of swamps in World War II was by the Germans when they flooded the French countryside to discourage allied parachute operations on D-Day. Many allied paratroopers died when they were unable to struggle out of their equipment before drowning. A moment of silence for them...

Anyway, here is a finished picture of the swamp, with some FoW U.S. paras walking across:

Next time I will discuss fields and how to make them for the tabletop. It is really more easy than you think!

-Intrepid

First Post

Hello everyone! After deciding for awhile whether or not to go through with it, I've finally decided to create a blog to aid my fellow historical wargamers out there to create high quality terrain from simple materials found around the house or at your flgs (friendly local gaming store). While it is primarily about terrain making, I will also sprinkle in some of my thoughts on the game in general, as well as some everyday thoughts I may have.

Before I get too deep into this, I should mention upfront that I play Flames of War, so all of the terrain will have a WWII focus. Most of the tutorials, though, have techniques and ideas that can be transferred to different periods or games, so be sure to take a look regardless and see if anything is of use to you.

One other thing: Most of the tutorials are for pieces that I have already built in the past, so if I lacked the forsight to take alot of pictures, I will just use the ones I have and explain the process as best I can. Most do have plenty of pictures, though, so this shouldn't be too much of a problem.

As soon as I get in the swing of uploading pictures and creating tutorials, I will update. As much as I want to tell myself that I will post frequently, I might go some time between posts. I do intend to make this blog a very comprehensive resource, though, with great ideas. Trust me, I know how it feels to not have the best  battlefield, or not much of one at all.

Anyway, thanks again for giving this a read. I'll be back soon with my first tutorial.

-Intrepid